BioborMD® is a cutting edge marine fuel additive engineered to enhance fuel performance,
increase lubricity and lower exhaust emissions. Cetane levels are raised for easier
cold starting, fuel lubricity and combustion is increased, while the entire fuel system is
cleaned of sludge. These advantages result in more power and torque with less fuel-related down time and maintenance costs.
Cetane Enhancer–Raises the Cetane level up to 3 numbers enabling faster fuel
ignition, while combustion improvers provide for a more complete fuel burn. Working
together, these factors enable fuel to ignite sooner and also burn longer and hotter for a
more complete fuel burn. Available horsepower, torque and fuel economy are increased,
while reducing or eliminating soot output and carbon buildup.
Adds Lubricity–Low sulfur diesel fuel mandated by the EPA is good for the
environment, but puts at risk the lubrication properties of the fuel. The only source of
lubrication for injectors and the fuel injection pump is the fuel that flows through it.
BioborMD® has been tested and shows an increase in fuel lubricity of 12.5% (Ball On
Cylinder Lubricity Evaluator–BOCLE). This increase protects and extends component
service life, lowering maintenance costs and down time when compared to the absence of
fuel lubricity in low and ultra-low sulfur diesel.
Anti-Gel–BioborMD® lowers the Pour Point by up to 45°F and the Cold Filter Plug
Point (CFPP) is reduced by up to 22°F, maintaining proper fuel flow when the fuel could
otherwise gel in unconditioned fuel.
Prevents and melts ice that causes frozen blockages and downtime. Once ice is
melted, any free water within the fuel system or water absorbed by the fuel are prevented
from refreezing. BioborMD® adds this “anti-freezing” action to keep the fuel flowing
and the engine running.
Sludge dispersants break up and dissolve fuel sediment sludge into small enough
particles that will pass harmlessly through filters and injectors, enabling your fuel system
to operate at peak efficiency with properly atomized fuel spray. BioborMD® cleans fuel
systems to allows the engine to produce its designed optimum horsepower and torque,
further increasing economy.
Corrosion inhibitors–with continued use, BioborMD®, significantly reduces
further fuel system corrosion from occurring, preventing costly leaks and spills.
Stabilizes the fuel–BioborMD® stabilizes the fuel by keeping it “fresh”, preventing
sludge from forming, maintains fuel system cleanliness and provides optimum fuel
quality and fuel system efficiency.
| Fuel to be treated (in gal.)
| BioborMD® (in oz.)
| Maintenance Treatment
In combination with the world leader BioborJF®, BioborMD® allows for the prevention
of, and protection against microbial growth (bugs) in fuel systems. In addition,
BioborMD® enables maximum performance of your engine.